Back to top

Combined compression/ flexure testing machine 250/15 kN

Article Number: 1.0244-S01

DIN EN 196-1, ASTM C109
For determining the compressive and flexural 
strength of cement and mortar prisms in 
compression and flexure devices
Accuracy class 1 acc. to EN ISO 7500-1
Servo controlled
Fully automatic test procedure
Digital display and peak memory
LAN and USB port for PC connection
Including TEAM VIEWER function
for remote maintenance
Extra accessories optionally available

Compression frameStable two columns frame with round 
exchangeable pressure plates for various 
compression and flexure devices
Load cell: acc. to the DMS principle
Load indication range 0 - 250 kN
Load measuring range 5 - 250 kN, class 1
(optional possible individual measuring
 range class 1)
Piston stroke approx. 30 mm
Distance between pressure plates 200 mm
Pressure plates Ø 165 mm
Hardness of plates 58-62 HRC > 600 HV
Electrical piston stroke limitation
Incl. test zone protection made of
polycarbonate
The compression and flexure frame as well 
as the control console are mounted
on a work console
Flexure testing frameLoad cell: acc. to the DMS principle
Flexure range 0.3 - 15 kN, class 1
(optional possible individual measuring
 range class 1)
Flexure display range 0 - 15 kN
Piston stroke approx. 30 mm
Distance between compression plates 200 mm
Pressure plates Ø 165 mm
Hardness of plates 58-62 HRC > 600 HV
Electrical piston stroke limitation
Incl. test zone protection made
of polycarbonate
The compression and flexure frame
as well as the control console are mounted
on a work console
The hydraulic power system is mounted
in the lower section of the unit
Control console Enable fully automatic test with 
predefined loade speed and force regulation
(distance and deformation controlled test
are available as an option)
Digital controller
Emergency switch, pump
and electronic control system EDC
Read out of the measuring data
Automatic fracture recognition
finely adjusted or switched off
(the pump switches off and the
piston moves controlled down)
Hydraulic StationPowerful radial piston pump
Max. pressure: 220 bar , Q = 1.5 l/min
Oil tank approx. 17 litres
Safety, control and directional valve
(Safety equipment, for example pressure
control with servo valve type Moog 20 l/min)
(closed loop control)
Switch box for electric connection
Electric main switch with overload
Emergency stop switch and 
fine flow oil filter, at least 3 µm
(mounted inside control console)
Dimension(wxdxh) = 1200 x 572 x 1755 mm
Weight approx. 450 kg
3 x 230/400 V / 50 Hz / 1.1 kW