Back to top
Machines > Compression and flexure testing machines for concrete
Compression and flexure
Article Number: 2.1099

Compression and flexure testing machine 3000/100 kN
EN 12390, EN 1339, EN 1340, ASTM C39
Accuracy Class 1 acc. to DIN EN ISO 7500-1

Consisting of a test frame and a separate control unit

Test frame 3000/100 kN
4-column frame with side arm for flexure
Straintest acc. to EN 12390-4
Compression range 0...3000 kN
Class 1 measuring range
60 kN up to 3000 kN
Other gradations of class 1 measuring ranges possible.
Compression plates dia. 320 mm, hardness min. 53 HRC
With centering on the lower pressure plate
Test chamber size compression machine 340 mm
Piston stroke 50 mm
Distance between columns front / side 360 / 260 mm

incl. protective grid, stop switch on safety
guard and piston stroke limiter.

Bending test chamber
The load frame is arranged for 3 points-
bending tests (consisting of 2 lower roller
support and one upper sword with one roller).

Bending range 0...100 kN
Class 1 measuring range 2 kN up to 100 kN
Other gradations of class 1 measuring ranges possible.
Test area size 220 mm
Piston stroke 220 mm
Bending-roller dia. 20 mm
Bending-roller length 510 mm

Controller Doli EDC 222
Provides fully automated experimental
procedures with predetermined rate of loading,
Digital display with peak hold and reading the measurement data.
Force controlled test
(Deformation and displacement controlled
tests require further accessories).
Reading the measured data Including automatic break detection

Powerful radial piston pump
Pmax = 500 bar , Q = 1,5 l/ min
With oil tank 17 litres capacity Incl. safety and control valves
Pressure control by servo valve Type Moog, 20 l/min)
(closed loop controlled)
Electric control cabinet with main switch and emergency STOP
With undervoltage release and with fine flow oil filter, at least 3 microns
(installed in the work table)
Quick release valve for faster piston return

Frame 3000/100 kN
approx. 1150 x 1050 x 1510 mm
(incl. base)
Weight: approx. 2100 kg
Control cabinet
approx. 1200 x 580 x 1500 mm
Weight: approx. 400 kg
3 x 230 / 400 V / 50 Hz / 1.1 kW

Other products in this category

Flexual -testing machine 300 kN
Flexual -testing machine 300 kN for tests on Steel fibre concrete and fiber-reinforced sprayed concrete acc. EN 14651 CMOD, EN...