Back to top
Machines > Compression and flexure testing machines for cement
Combined compression/ flexure
Article Number: 1.0244

Combined compression/flexure testing machine 250/15 kN
Accuracy class 1 acc. to EN ISO 7500-1
Servo controlled
DIN EN 196-1, ASTM C109
Fully automatic test procedure
Digital display and peak memory
LAN and USB port for PC connection
Including TEAM VIEWER function for
remote maintenance

Stable two columns frame

Technical data - compression frame
Load cell: acc. to the DMS principle
Pressure range 5 - 250 kN, class 1
(optional possible individual measuring
range class 1)
Pressure display range: 0 - 250 kN
Piston stroke: approx. 30 mm
Distance between compression plates:45 mm
Pressure plates 40x40 mm
Hardness of platens: 58-62 HRC > 600 HV
Electrical piston stroke limitation
Incl. test zone protection made of
polycarbonate
            
Technical data - flexure testing frame
Load cell: acc. to the DMS principle
Flexure range 0.3 - 15 kN, class 1
(optional possible individual measuring
range class 1)
Flexure display range: 0 - 15 kN
Piston stroke approx. 30 mm
Test chamber size 50 mm
Length of roller: 50 mm
Radius of rollers: 5 mm
Fixed distance of the lower rollers 100 mm
Electrical piston stroke limitation
Incl. test zone protection made of polycarbonate

Test chamber design for deformation
controlled compression, bending-
or tensile tests as an option,
for example EN 12002

The compression and flexure frame
as well as the control console are mounted
on a work console.
The hydraulic power system is mounted
in the lower section of the unit.

Control console with digital controller
Including emergency switch, pump
and electronic control system EDC 222
Enables fully automatic test with predefined
load speed and force regulation
(distance and deformation controlled test
are available as an option)
Read out of the measuring data
Including automatic fracture recognition
finely adjusted or switched off
(the pump switches off and the
piston moves controlled down)

Hydraulic Station
Powerful radial piston pump
Max. pressure: 220 bar , Q = 1.5 l/min
Oil tank approx. 17 litres
Incl. safety, control and directional valve
(Safety equipment, for example pressure
control with servo valve type Moog 20l/min)
(closed loop control)
Including switch box for electric connection
Including electric main switch with overload
protection and emergency switch and fine
flow oil filter, at least 3 µm
(mounted inside cabinet)

Dim. (w/d/h) = 1200 x 572 x 1755 mm
Weight approx. 450 kg
3x230/400 V / 50 Hz / 1.1 kW

Other products in this category

Combined compression/ flexure
Combined compression/flexure testing machine 250/15 kN - with round pressure plates Accuracy class 1 acc. to EN ISO 7500-1 Servo...
Compression testing machine
Compression testing machine 250 kN Accuracy class 1 acc. to EN ISO 7500-1 Servo controlled DIN EN 196-1, ASTM C109...
Combined compression/flexure
Combined compression/flexure testing machine 250/15 kN Accuracy class 1 acc. to EN ISO 7500-1 Manual controlled DIN EN 196-1, ASTM...